';
side-area-logo

Forme d’Acqua wants to shape your ideas, creating fountains able to give excitement and add value to the selected locations. We wants the word “fountain” to become synonym for sustainability and reliability Discover About forme d’acqua

Mylar – Solidi d’Acqua

Mylar is a minimalist water curtain, a high-impact fountain

It has a rectangular structure with limited depth and is available in 4 different widths. It is visible on both sides and can therefore be placed against a wall or act as a dividing element between two spaces.

Made of AISI316 stainless steel which ensures maximum resistance to water and chemical agents, it is characterized by a series of thin polyethylene terephthalate wires, a plastic material commonly known under the trade name of Mylar, which is proposed here in an original way.

The water flows down from the upper basin  and flows along the Mylar wires up to the lower collection tank. The wires are housed inside special OASE nozzles that allow water to flow and are held in place by a weight placed at the lower end, in the collection tank below. The fountain is driven by an OASE Aquarius Universal Premium pump that puts the used water back into circulation.

forme-dacqua-linea-solidi-mylar-tecnica
forme-dacqua-linea-solidi-mylar-foto-1-600x400
forme-dacqua-linea-solidi-mylar-foto-2-600x400
forme-dacqua-linea-solidi-mylar-foto-3-600x400

In the upper part of the fountain an IP 68 LED RGB + White LED bar illuminates the movement of the water along its path. Thanks to the light, the transparent wire becomes invisible and the final effect is that of a very thin and perfect column of water that descends slowly and silently.

The water flow is particularly homogeneous and makes this fountain very suitable for interior spaces, but even in the external ones the effect has a strong impact.

An element of high aesthetic value useful for decorating a room, a terrace or to create a partition wall, but which also contributes to the healthiness of the air by collaborating in its correct humidification.

The fountain is equipped with an automatic mechanical loading system for replenishing the evaporated water, just connect it, at the time of installation, to a half-inch drinking water intake. It can be managed with an on / off switch, programmable timer, remote control or integrated with home automation.

It can be installed with a manual or automatic filtration system, with control and injection of anti-algae and anti-limestone, placed in an appropriately prepared adjacent technical compartment.

The shell can be in brushed or powder-coated steel with a wide color palette that allows maximum customization and integration of the fountain in any environment.

FOUR VERSIONS AVAILABLE

Available in four versions with different widths

Mylar6

60cm wide, 200cm high, 40cm deep
forme-dacqua-linea-solidi-mylar6-tecnica-600x800

Mylar12

120cm wide, 200cm high, 40cm deep
forme-dacqua-linea-solidi-mylar12-tecnica-600x800

Mylar18

180cm wide, 200cm high, 40cm deep
forme-dacqua-linea-solidi-mylar16-tecnica-600x800

Mylar24

240cm wide, 200cm high, 40cm deep
forme-dacqua-linea-solidi-mylar24-tecnica-600x800

poloska

THE LINE

Discover the new line of modular fountains customizable

Colonna

Infinity fountain with a simple and essential shape.
forme-dacqua-linea-solidi-colonna-tecnica-600x800
The structure is made of AISI 316 stainless steel, durable and stable even without painting. Resistant to the outside in any environmental condition, it can also be placed indoors: the perfect control of the movement of the water guarantees the total absence of splashes and noise.
Find out more

Cubo | Cubetto

Infinity fountain with a simple and essential shape.
forme-dacqua-linea-solidi-cubo-tecnica-600x800
Available in two different sizes. The structure is made of AISI 316 stainless steel, durable and stable even without painting. Resistant to the outside in any environmental condition, it can also be placed indoors: the perfect control of the movement of the water guarantees the total absence of splashes and noise.
Find out more

Jersey

Infinity fountain with a trapezoidal geometric shape
forme-dacqua-linea-solidi-jersey-tecnica-600x800
The structure, made of AISI 316 stainless steel, is resistant to the outside in any environmental condition but can also be placed indoors: the perfect control of the movement of the water guarantees the total absence of splashes and noise.
Find out more

Isola

Water feature with a simple and essential shape.
forme-dacqua-linea-solidi-isola-tecnica-600x800
Composed of a steel structure, it is characterized by a series of very thin hollow reeds. From the top of each reed, a hedge of water emerges, silent and calm, slides along the reeds themselves, wrapping the decorative elements arranged on them along its path.
Find out more

Mylar

Mylar is a minimalist water curtain, a high-impact fountain
forme-dacqua-linea-solidi-mylar-tecnica-600x800
It has a rectangular structure with limited depth and is available in 4 different widths. It is visible on both sides and can therefore be placed against a wall or act as a dividing element between two spaces.
Find out more

Glass

A rigorous and ethereal fountain
forme-dacqua-linea-solidi-glass-tecnica-600x800
With its regular flow, it gives harmony to the environment in which it is inserted, spreading the positive energy contained in the elements that compose it, first of all the water, which transparent glides on the glass surfaces.
Find out more

REQUEST A QUOTE

Contact us now for a free consultation or quote for the Solidi d'Acqua line.